An
introduction to microphones and how to choose the perfect mic for
your studio recording
Microphones—they
are the mechanical ears of our technology driven generation. They
perform the simple yet incredible task
of picking up sound from the environment and converting it into
electrical signals that can be played back to us. Understanding what
a microphone does is simple, but choosing the right microphone for a
job could be a truly daunting task. Especially
when it comes to studio recording,
the perfect microphone for the task could make all the difference in
the final mix.
Microphones come in a great variety and are built differently
to respond to specific frequencies. In fact, no two microphones in
the world could give the exact same output because small differences
in the manufacturing process could lead to variations in sound
pick-up. This article is to guide you through the basics of
microphone specifications and how to select microphones for your
studio recording.
What
exactly do you need to be familiar with? To understand what
type of sound a microphone is picking up, you should
understand a microphone's frequency response. Similarly,
to understand where
the microphone is picking up sound, you should understand the mic's
polar pattern.
There are three main categories of microphones—dynamic,
ribbon, and
condenser—and
I will provide you with a brief list of popular microphone models
with their specifications.
Frequency
Response
A
microphone's frequency response is a curve that describes how the
microphone boosts or cuts specific frequencies in a range. If your
microphone picks up sound exactly the
way it is, the frequency response would be a flat line.
However, no microphone has a completely flat frequency response. Our
ears don't even give us a flat frequency response—and I'm glad it
doesn't. Likewise, musicians generally would rather microphones have
a “presence peak” somewhere around the frequency range of the
sound they want to capture. This way they can zone in to accentuate
specific sounds and dim the excessive noises. The average frequency
range of a human voice is from 85
to 255 Hz, so many mics have presence peaks around that
range to efficiently capture the human voice.
![]() |
| Frequency Response of a Shure SM57 Microphone |
Polar
Pattern
A
microphone's polar patter describes the microphone's spatial pick up
pattern. In other words, it tells us if a microphone is picking up
sound from the front, back, a little bit of both, or everywhere. To
determine where the front of the microphone is, we usually look for
the microphone's brand name—it is printed on the axis of the mic
where we label as 0 degrees. Listed below are examples of polar
patterns and how they would show up on microphone specifications:
- Omni-directional microphones pick up from all directions in the same amount.
- Cardioid microphones pick up best on axis, roll off on the sides, and don't really pick up from behind the mic.
- Hyper-cardioid microphones mostly pickup on axis. There is less pickup from the sides and a little more pickup directly behind than the cardioid.
- Bi-directional microphones pick up from the front and directly behind and are popularly used in the recordings of duets.
- Shotgun microphones have a very narrow pick up directed mostly on axis and some behind axis.
Dynamic
Microphones
A
dynamic microphone is often also referred to as a moving coil mic.
First sold commercially in the 1930s, this type of microphone has a
metal coil built in that vibrates when there are changes in sound
pressure level. The coil moves back and forth between a magnet and
induces current flow and converts the acoustic energy to an
electrical signal.
Ribbon
Microphones
Similar
to the dynamic mic, the ribbon mic induces electrical signals from
acoustic energy by vibrating metal through magnets. But instead of
using a coil, ribbon mics use a very thin piece of metal.
Because
they operate with a very thin metal sheet, ribbon mics are fragile
and can even be damaged by wind.
They are however known for producing pleasantly warm, rich sounds
that work very well with vocals.
Condenser
Microphones
Condenser
microphones convert sounds to electrical signal through capacitors:
two large plates that move and change capacitance between them.
Capacitors need to have a charge applied to them, so they are
operated by an outside electrical source or phantom power. In
addition, the output of condenser mics are at very low levels and
cannot be useful unless amplified by a built-in mic preamp.
In
general, condenser microphones are more expensive but are very
popular in studio recording because they “[allow] for a greater
depth of musical expression” (Chooser's). Condensers cover a wider
frequency bandwidth and are more sensitive than dynamic microphones.
Popular
Models:
Frequency
Response: 40 to 15,000 Hz
Polar
Pattern: Cardioid
Retail
Price: $124
Type:
Dynamic
Frequency
response: 50 to 20,000 Hz
Polar
Pattern: Cardioid
Retail
Price: $436
Type:
Condenser
Frequency
Response: 20 to 20,000 Hz
Polar
Pattern: Cardioid
Retail
Price: $629
Royer
R-121
Frequency
Response: 30 to 15,000 Hz
Polar
Pattern: Cardioid
Retail
Price: $1,395
It is also good for recording brass and
other mid-range instruments.
Type:
Ribbon
Frequency
Response: 30 to 15,000 Hz
Polar
Pattern: Bi-directional
Retail
Price: $1,563
Of course, there are tons of microphones out there and this article only showcases a fraction of the available microphones in an industry that is constantly evolving with new technology. With the trend of musicians building their own home studios and mixing on their own laptops, USB microphones have become an increasingly popular choice due to their convenience and affordability. However, technology has not developed to the point which USB mics can produce the same sound quality as professional studio mics can. But with the advent of advanced audio engineering software like Protools, you could put a filter on a recorded track with a few clicks and make it sound like gold. You might be thinking—then what's the point of going through all this trouble to find the perfect microphone if I could just software engineer one? Let's just say that the music industry is extremely competitive and that knowing your microphones will definitely give you an advantage from the very first step of the recording process. And at the end of it all, your hard work and research will not go to waste because—trust me—someone would be able to hear the difference (drops mic).
_______________________________________________________________
Works Cited
"Best
Dynamic Microphones of ALL-TIME: The Top 6 List." E-Home
Recording Studio.
N.p., 24 Nov. 2012. Web. 23 Sept. 2015.
"Buying
Guide: How to Choose a Microphone | The HUB." The
HUB from Musician's Friend.
N.p., n.d. Web. 23 Sept. 2015.
Schappler,
Stephen. "11 of the Best Studio Microphones Ever + How and When
to Use Them - Tuts+ Music & Audio Tutorial." Music
& Audio Tuts+.
N.p., 15 Aug. 2008. Web. 23 Sept. 2015.
Woodard,
Jimmy. "Audio Production." Jwoodardvt.
N.p., 3 May 2013. Web. 23 Sept. 2015.
"Microphones:
A Chooser's Guide." TCI
27.9
(1993): 48. ProQuest.
Web. 23 Sep. 2015.









No comments:
Post a Comment