Wednesday, September 23, 2015

The Hitchhiker's Guide to Microphones

An introduction to microphones and how to choose the perfect mic for your studio recording

Microphones—they are the mechanical ears of our technology driven generation. They perform the simple yet incredible task of picking up sound from the environment and converting it into electrical signals that can be played back to us. Understanding what a microphone does is simple, but choosing the right microphone for a job could be a truly daunting task. Especially when it comes to studio recording, the perfect microphone for the task could make all the difference in the final mix. Microphones come in a great variety and are built differently to respond to specific frequencies. In fact, no two microphones in the world could give the exact same output because small differences in the manufacturing process could lead to variations in sound pick-up. This article is to guide you through the basics of microphone specifications and how to select microphones for your studio recording.

What exactly do you need to be familiar with? To understand what type of sound a microphone is picking up, you should understand a microphone's frequency response. Similarly, to understand where the microphone is picking up sound, you should understand the mic's polar pattern. There are three main categories of microphones—dynamic, ribbon, and condenser—and I will provide you with a brief list of popular microphone models with their specifications.

Frequency Response
A microphone's frequency response is a curve that describes how the microphone boosts or cuts specific frequencies in a range. If your microphone picks up sound exactly the way it is, the frequency response would be a flat line. However, no microphone has a completely flat frequency response. Our ears don't even give us a flat frequency response—and I'm glad it doesn't. Likewise, musicians generally would rather microphones have a “presence peak” somewhere around the frequency range of the sound they want to capture. This way they can zone in to accentuate specific sounds and dim the excessive noises. The average frequency range of a human voice is from 85 to 255 Hz, so many mics have presence peaks around that range to efficiently capture the human voice.
Frequency Response of a Shure SM57 Microphone

Polar Pattern
A microphone's polar patter describes the microphone's spatial pick up pattern. In other words, it tells us if a microphone is picking up sound from the front, back, a little bit of both, or everywhere. To determine where the front of the microphone is, we usually look for the microphone's brand name—it is printed on the axis of the mic where we label as 0 degrees. Listed below are examples of polar patterns and how they would show up on microphone specifications:
  • Omni-directional microphones pick up from all directions in the same amount.
  • Cardioid microphones pick up best on axis, roll off on the sides, and don't really pick up from behind the mic.
  • Hyper-cardioid microphones mostly pickup on axis. There is less pickup from the sides and a little more pickup directly behind than the cardioid.
  • Bi-directional microphones pick up from the front and directly behind and are popularly used in the recordings of duets.
  • Shotgun microphones have a very narrow pick up directed mostly on axis and some behind axis.

Dynamic Microphones
A dynamic microphone is often also referred to as a moving coil mic. First sold commercially in the 1930s, this type of microphone has a metal coil built in that vibrates when there are changes in sound pressure level. The coil moves back and forth between a magnet and induces current flow and converts the acoustic energy to an electrical signal.
Source: Woodard
If you're looking for a microphone to use on loud sounds—for example, a snare drum—then you should look into dynamic microphones. They are able to withstand higher decibel levels and are known to be more physically durable from both impact and moisture. Their frequency responses also tend to be more erratic.


Ribbon Microphones
Similar to the dynamic mic, the ribbon mic induces electrical signals from acoustic energy by vibrating metal through magnets. But instead of using a coil, ribbon mics use a very thin piece of metal.

Because they operate with a very thin metal sheet, ribbon mics are fragile and can even be damaged by wind. They are however known for producing pleasantly warm, rich sounds that work very well with vocals.

Condenser Microphones
Condenser microphones convert sounds to electrical signal through capacitors: two large plates that move and change capacitance between them. Capacitors need to have a charge applied to them, so they are operated by an outside electrical source or phantom power. In addition, the output of condenser mics are at very low levels and cannot be useful unless amplified by a built-in mic preamp.
Source: Woodard
In general, condenser microphones are more expensive but are very popular in studio recording because they “[allow] for a greater depth of musical expression” (Chooser's). Condensers cover a wider frequency bandwidth and are more sensitive than dynamic microphones.

Popular Models:

Shure SM57
Type: Dynamic
Frequency Response: 40 to 15,000 Hz
Polar Pattern: Cardioid
Retail Price: $124

If your studio doesn't have an SM57, get out—fast. Basically your staple dynamic mic, the SM57 is cheap enough and good for almost everything including voice, guitar, and drums. It can also withstand any amount of your physical abuse. Drop it, sit on it, spit on it—it'll still work fantastically.





Shure SM7B
Type: Dynamic
Frequency response: 50 to 20,000 Hz
Polar Pattern: Cardioid
Retail Price: $436

This microphone recorded Michael Jackson's Thriller album. Enough said. Featuring a built in pop-filter, this mic is designed to tackle vocals and vocals only.





AKG C451E
Type: Condenser
Frequency Response: 20 to 20,000 Hz
Polar Pattern: Cardioid
Retail Price: $629

This small condenser microphone is good for recording brighter and crispier sounds. It is also a staple for most studios and is used to record cymbals, acoustic guitar, percussion, and the like.





Royer R-121
Type: Ribbon
Frequency Response: 30 to 15,000 Hz
Polar Pattern: Cardioid
Retail Price: $1,395

If you're looking for something to record your electric guitar, look no further. This ribbon mic focuses on the mid-range frequencies and takes out high pitches, producing a warmer sound. 
It is also good for recording brass and other mid-range instruments.





Coles 4038
Type: Ribbon
Frequency Response: 30 to 15,000 Hz
Polar Pattern: Bi-directional
Retail Price: $1,563

This ribbon microphone is all about that smooth jazz. Known for producing smooth sounds, this microphone is popularly used to record piano, brass instruments, and jazz vocals.



Of course, there are tons of microphones out there and this article only showcases a fraction of the available microphones in an industry that is constantly evolving with new technology. With the trend of musicians building their own home studios and mixing on their own laptops, USB microphones have become an increasingly popular choice due to their convenience and affordability. However, technology has not developed to the point which USB mics can produce the same sound quality as professional studio mics can. But with the advent of advanced audio engineering software like Protools, you could put a filter on a recorded track with a few clicks and make it sound like gold. You might be thinking—then what's the point of going through all this trouble to find the perfect microphone if I could just software engineer one? Let's just say that the music industry is extremely competitive and that knowing your microphones will definitely give you an advantage from the very first step of the recording process. And at the end of it all, your hard work and research will not go to waste because—trust me—someone would be able to hear the difference (drops mic).

_______________________________________________________________
Works Cited
     "Best Dynamic Microphones of ALL-TIME: The Top 6 List." E-Home Recording Studio. N.p., 24 Nov. 2012. Web. 23 Sept. 2015.
     "Buying Guide: How to Choose a Microphone | The HUB." The HUB from Musician's Friend. N.p., n.d. Web. 23 Sept. 2015.
     Schappler, Stephen. "11 of the Best Studio Microphones Ever + How and When to Use Them - Tuts+ Music & Audio Tutorial." Music & Audio Tuts+. N.p., 15 Aug. 2008. Web. 23 Sept. 2015.
     Woodard, Jimmy. "Audio Production." Jwoodardvt. N.p., 3 May 2013. Web. 23 Sept. 2015.

      "Microphones: A Chooser's Guide." TCI 27.9 (1993): 48. ProQuest. Web. 23 Sep. 2015.

Tuesday, September 22, 2015

Growing a Farmer #2

I found Growing a Farmer to be interesting because Timmermeister's lifestyle is so much different than what we are accustomed to. The nature of how he described his experiences is also very entertaining with a great voice and easy to follow. It is definitely interesting learning about the process and regulations farmers have to follow to produce the foods that we consume on a daily basis. Being a farmer and living off of the land turns out to be a lot more difficult and stressful than I thought. Timmermeister wrote “"I enjoy a life and diet that few can enjoy”, which I thought was interesting because most people imagine farmers to have a very simple, carefree lifestyle in close proximity to nature. He also writes though, "I don't have a recommendation for a way of growing food that would be accessible to everyone. I can only say that living off the land, and grandly, is possible." So my takeaway from this is that living life grandly as a farmer is definitely possible but not for everyone.

I could relate to Timmermeister's writing somewhat because my dad is really into researching about farming and growing his own organic foods. My dad has been dreaming of building his own “farm” in Taiwan for over a good five years now. He had already bought his own land, built a house on it, and is currently planning to grow crops on the land. When I say farm though, I'm referring to something that's more like a very large garden. Regardless, my dad has been researching methods of farming and Taiwan's farming regulations so I got a tiny glimpse of how that is like in real life. Farming is definitely a lot harder than it seems and requires a lot of dedication.  

Monday, September 14, 2015

Growing a Farmer: First Impressions

Before reading Growing a Farmer by Kurt Timmermeister, I expected the book to be similar to an informative guide with tips on farming. But as I began to read the chapters, I found that the author is instead describing his experiences and outlook on becoming a farmer. I enjoy reading Timmermeister's prose because it is easy to follow, but I did find myself losing interest in the topics at points. However, that is an issue of personal interests. I am very impressed by the detail in which he described his experience growing a bee hive for his restaurant though!

Friday, September 11, 2015

Life as a Finance Sales Intern at International Business Machines

Many might think that the typical job of an employee in the finance sales department consists of meeting with clients to discuss the company's products and close deals with other businesses. However, my experience being a finance sales Blue Gene intern at International Business Machines in Taiwan has been widely different than what many may assume the job entails.

According to Americas Job Exchange, the primary responsibilities of a finance services sales agent include the following:
  • Sell financial services to businesses and individuals.
  • Recommend certain services such as life insurance, retirement income, investments, and long-term care insurance.
  • Build relationships with clients and communities.
  • Provide solutions for short and long-term financial goals.
  • Help clients achieve financial security.
In other words, a finance sales agent spends a lot of time communicating with clients, gaging their needs, and providing potential IBM solutions to the clients. Due to the nature of the job and the high profile clients that IBM works with, IBM would not directly send interns to close deals. Instead, my job as an intern was more like conducting research and compiling information to assist IBM employees to achieve the goals listed above. I will describe the life of being an IBM intern by comparing my experience to the following more familiar groups of people:
  1. Student
  2. Researcher
  3. Foreigner
1. Student:
Interning at IBM (and I can imagine at many other big companies with summer internship programs) is a lot like taking a crash course on the ins and outs of the company. Although I was designated to the finance sales department, I had the opportunity to learn from all departments in IBM through the available seminars, group projects, and weekly assignments.

Roughly 100 interns were split into 8 groups of approximately 12 people. Each group participated in weekly competitions where an IBM manager would post a question regarding an IBM product on the IBM digital platform and give out prizes to whichever group could provide the fastest answer. At the end of the two month internship, each group was also assigned to come up with a real world issue that an IBM product could potentially solve. My group's final project focused on compiling and analyzing big data from platforms on busses, transits, stoplights, and metro cards and then presenting the data in easy to understand graphics on a phone application to gage the current traffic on Taipei's roads—making transportation in Taipei city more efficient.

Another aspect that makes IBM much like a college is the fact that employees host weekly seminars on the topics of big data, cloud computing, mobile banking, and the like to other employees. Inspirational speeches are also a huge part of the interning experience. Since many interns are just finishing college, these lifestyle-tips and disciplinary guidelines get the interns to begin thinking about their life after college and how to deal with life working in the office.

2. Researcher:
My primary job at IBM was to conduct market research on IBM's clients in the finance category. I was assigned one or two companies a week on which to conduct thorough research and asked to present my findings to the sales department at the end of each week. Most of the companies were major Chinese and Taiwanese banks or stock exchange companies such as DBS bank, Taiwan Stock Exchange, Chailease holdings, Waterland Financial Holdings, and many more.

A report consisted of the company's basic information and function, key contacts in the IT department, annual reports, recent news and trends, current hardware and software systems, client history with IBM, partnerships with other IT companies, and needs and challenges. I then comprehend all of this information and design potential business development plans to pitch the companies. For example, if a bank noted in their annual report that they need to improve their regulations to fit the new FATCA law, then I would suggest IBM security zsecure, a compliance solution that can adapt to ever changing finance regulations.

3. Foreigner
Lastly, I felt much like a tourist during my days of interning in one of the most bustling districts of Taipei city. During lunch breaks and after work, I would explore restaurants in the neighborhood with other interns. By the end of the summer, I was able to become very familiar with the area and bring my other friends and family to restaurants that I discovered during my time working there.

Re-learning mandarin was also a huge part of my learning experience as an intern. Despite IBM being an international company, most of the employees in the office are from Taiwan and are not very fluent in English. So, when I presented my first PowerPoint to the department in English, I found that many of the employees just nodded and went along the presentation without fully grasping what I was presenting. Although the department did not request me to present in mandarin, I felt that communicating with the department in a language that they were more comfortable with was more beneficial to both my learning experience and their understanding of my work. So I tried to present my work in mandarin with English notes in the slides. I believe the result was worth all the hard work I put into translating each Chinese phrase into English and vice versa.

After interning at IBM my biggest take-aways are learning details to the various IBM products and how big data and cloud computing work, becoming an expert Chinese-English translator, and developing good and more efficient work ethics and communication skills. Although my future career goals are not related to sales or IT, I still feel that interning at IBM has taught me many skills that I could apply to any future office job.